28
a
b
c d
Procedure to replay the brightness
Press the LIM switch
a
to set the "Replay" mode. (The LIM indicator
b
is ON.)
When the desired objective or the observation method is selected, the
stored brightness is set automatically.
Example of the stored brightness
When you press the SET switch
d
when units are combined and set
as follows, the brightness corresponding to
or in the tables
will be stored.
Combination example 1
Unit Setting
Reflected LED lamp housing (BX3M-LEDR)
Transmitted LED lamp housing (BX3M-LEDT)
Reflected light
illumination
Coded reflected LED light illuminator for BF/DF/PO
(BX3M-RLAS-S)
DF
Coded quintuple revolving nosepiece for BF/DF
with slider slot for DIC
(U-D5BDRES-ESD)
20X
Objective
5X(1 hole), 10X(2 holes), 20X(3 holes), 50X(4 holes),
100X(5 holes)
Example of stored brightness 1
Observation
method
Objective
Reflected light illumination
Transmitted
light
illumination
CUBE1 CUBE2 CUBE3
OB1
OB2
OB3
1
To Next Page
Loading...
