Olympus BX53M - Introduction

1
BX53M
Introduction
This microscope employs the UIS2 (UIS) optical systems. If you use eyepiece, objective, observation tube or
condenser, etc. together with this microscope, be sure that they apply to the UIS2 (UIS) optical system series.
Using inappropriate units restricts the performance.
(There are units usable with the BX series. Contact Olympus or refer to the latest version of catalogs.)
Configuration of instruction manuals
Read all the instruction manuals provided with the units you purchased.
The following instruction manuals are prepared for the units to be used with this system.
Instruction manuals Main contents
BX53M system microscope
(this instruction manual)
Reflected light brightfield observation, reflected light darkfield
observation, reflected light simple polarization observation, reflected
light differential interference contrast observation, reflected light
fluorescence observation, reflected light infrared observation, transmitted
light brightfield observation and transmitted light simple polarization
observation
BX53/53M-P polarizing microscope Transmitted light polarization observation
BX3M-CB/CBFM
Control box/FM Control box
Control box (BX3M-CB)
U-LGPS
LED and LDP light source
Connection of the light guide illumination system with the liquid light
guide, etc.
U-RFL-T power supply for mercury
burner /
U-RX-T power supply for xenon burner
Connection of the mercury lamp housing with the power supply
TH4 halogen lamp power supply unit Connection of the halogen lamp housing with the power supply
Label of the immersion oil
Read the label of the immersion oil you purchased.
Immersion oil Major contents
IMMOIL-8CC
IMMOIL-500CC
IMMOIL-F30CC
Contains the cautions and handling methods of the immersion oil.
Intended use
This product has been designed to observe magnified images of specimens in industrial applications.
Appropriate specimens can include semiconductors, electrical components, molded articles, or mechanical parts.
Industrial applications include observation, inspection or measurements.
Do not use this product for any purpose other than its intended use.