118
6
Adjusting the image quality and exposure
NOISE REDUCTION
This function reduces the noise that is generated during long exposures. When
shooting night scenes, shutter speeds become slower and noise tends to
appear on images. When noise reduction is set to ON, the camera automatically
reduces noise to produce clearer images. However, shooting time is
approximately twice as long as usual.
Noise reduction can only be used when the shutter speed is set slower than
1/2 sec.
1 In the top menu, select MODE MENU
CAMERA NOISE REDUCTION ON or
OFF, and press e.
g“Menu basics” (P.38)
•Press e again to exit the menu.
• When m mode is set, noise reduction is fixed to ON.
• When noise reduction is set to ON, the camera implements noise-reducing
processes after each shot. For this reason, shooting time is approximately
twice as long as usual. During this time, you cannot continue shooting.
• When noise reduction is set to ON, sequential shooting (i, j, k,
7) is not possible.
• This function may not work effectively with some shooting conditions or
subjects.
• As the shutter speed is relatively slow, the use of a tripod is recommended.
Noise reduction: OFF Noise reduction: ON
The purpose of these pictures is to illustrate the effects of noise reduction.
They are not actual pictures.
Mode dial
Arrow pad
OK button
Note
To Next Page
Loading...
