Olympus CAMEDIA C-8080 Wide Zoom - Creating an Index

131
Editing movies
7
Playback
Creating an index
3 Press ac to select INDEX, then press e.
4 Select the first frame of the index with the
arrow pad and press e.
a : Jumps to the first frame of the movie.
c : Jumps to the last frame of the movie.
d : Displays the next frame. The movie can be
played continuously by holding the button down.
b : Displays the previous frame. The movie can be
played continuously in reverse by holding the
button down.
5 As in Step 4, select the last frame of the
index with the arrow pad and press e.
6 Press ac to select the card, then press e.
• If only one card is inserted, skip this step.
• When there is insufficient card memory, the display returns to the setting
screen.
7 Press ac to select OK, then press e.
• The camera returns to the playback mode, then the
9 frames extracted from the movie appear as an
index display. The index is stored as a new picture.
•
If you want to select different frames, select RESET
and press
e and repeat the procedure from Step 4.
• To quit the index function, select CANCEL and
press e.
TIPS
• The index is stored as a still picture in a different record mode from the
original movie.
Record mode when the movie was shot Record mode when stored as an index
SHQ SQ1 (2048 × 1536 pixels: HIGH)
HQ SQ2 (1024 × 768 pixels: HIGH)
SQ SQ2 (640 × 480 pixels: HIGH)
CANCEL
GO
SELECt
MOVIE PLAYBACK
MOVIE PLAY
INDEX
EDIt
OK
00:00
00:00
/ 00:36
00:36
OK
00:36
00:36
/ 00:36
00:36
GO
SELECt
OK
RESEt
INDEX
CANCEL