140
Editing still pictures
7
Playback
• Trimming is not possible in the following cases.
Movies, or when there is insufficient memory space on the card.
• It may not be possible to trim pictures taken with another camera.
• If a trimmed picture is printed out, it may appear grainy.
RAW editing
2 Select RAW DATA EDIT, then press d.
3 Turn the control dial to select the still picture
you want to edit, then press e.
• You can only select an image recorded in RAW
mode.
4 Press ac to select the item you want to
set, then press d.
5 Press ac to select the desired setting,
then press e.
6 When all the necessary items have been set,
press e.
7
Press
ac
to select the card, then press
e
.
• If only one card is inserted, skip this step.
•
When there is insufficient card memory, the display returns to the setting screen.
8 Press ac to select OK, then press e.
•The BUSY bar is displayed during RAW editing. After the image is saved, the
camera returns to Step 3.
(Items that can be set by RAW editing
* Can only be selected if WB was set to CUSTOM or V during shooting.
Item Settings Ref. page
K TIFF, SHQ, HQ, SQ1, SQ2
P. 1 0 2
F ±5
P. 1 0 8
WB AUTO, PRESET1, PRESET2, CUSTOM*, V*
P. 1 0 9
> RED 7 to BLUE 7
P. 11 2
SCENE MODES NORMAL, I, L, m
P. 11 7
SHARPNESS ±5
P. 11 4
CONTRAST ±5
P. 11 5
HUE ±5
P. 11 6
SATURATION ±5
P. 11 7
FUNCTION OFF, BLACK & WHITE, SEPIA
P. 9 8
P —
P. 1 3 9
Note
HQ
To Next Page
Loading...
