139
Editing still pictures
7
Playback
• Resizing is not possible in the following cases.
Movies, pictures that have been edited on a PC, or when there is
insufficient memory space on the card.
• If the size of the selected picture is 640 × 480, you cannot select 640 × 480.
Trimming
2 Select P, then press d.
3 Turn the control dial to select the still picture
you want to edit, then press e.
4 Press ac to select P, then press e.
5 Use the arrow pad, zoom lever and control
dial to decide the trimming position and
size.
•Press acbd to select the trimming frame, and
turn the zoom lever toward W or T to decide the
trimming size.
• Use the control dial to select the height and width
of the trimming frame.
• 3:2 trimming size can be selected when the size of
the selected picture is 3264 × 2448 or
3264 × 2176.
6 Press e.
• The trimmed picture is displayed for one second.
7 Press ac to select the card, then press e.
• If only one card is inserted, skip this step.
• When there is insufficient card memory, the display returns to the setting
screen.
8 Press ac to select OK, then press e.
•The BUSY bar is displayed during trimming. After
the image is saved, the camera returns to Step 3.
• The trimmed picture is stored as a separate picture
from the original.
• If you want to trim the picture again, select RESET
and press e. Then repeat the procedure from Step
5.
• To quit the trimming function, select CANCEL and press e.
Note
CANCEL
EXIt
GO
SELECt
GO
GO
GO
SELECt
OK
RESEt
CANCEL
To Next Page
Loading...
