119
6
Adjusting the image quality and exposure
Histogram – Displaying the luminance
distribution of still pictures
During still picture shooting, you can display a histogram showing the brightness
and contrast of your subject in the viewfinder or on the monitor. You can also
display the black and white areas directly on the image.
Checking the histogram during shooting enables precise exposure control.
OFF The histogram is not displayed.
F ON The histogram is displayed when F is pressed.
g“Exposure compensation” (P.108)
ON The histogram is always displayed.
DIRECT The black and white areas are displayed directly on the image.
Ex. When ON is selected in P mode
When the image is bright When the image is dark
Ex. When DIRECT is selected in P mode
F5.6
SET
The part indicated in green in the histogram shows the luminance distribution within
the histogram target mark.
Histogram
target mark
If the peak fills too
much of the right
frame, the image will
appear mostly white.
F5.6
SET
If the peak fills too
much of the left frame,
the image will appear
mostly black.
Red frame: Mostly white area
Blue frame: Mostly black area
If the area contains both black and white parts, it
is also displayed in the blue frame.
To Next Page
Loading...
