172
9
Camera Settings
PIXEL MAPPING – Checking the image
processing functions
The Pixel Mapping feature allows the camera to check and adjust the CCD and
image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait over a minute
after the monitor is used or continuous shots are taken to allow for proper
performance of the Pixel Mapping function.
1 Select SETUP PIXEL MAPPING, and
press d.
g“Menu basics” (P.38)
• START appears.
2 Press e.
•The BUSY bar is displayed during Pixel Mapping.
When Pixel Mapping is finished, the screen returns
to the C mode menu.
• If you accidentally turn the camera off during Pixel Mapping, start again from
Step 1.
Mode dial
Arrow pad
OK button
BUSY
Note
To Next Page
Loading...
