65
4
Flash
External flash (optional)
Using an Olympus external flash
Various types of flash shooting are possible with the Olympus FL series external
flashes.
If the external flash is used, flash mode and exposure compensation will be
detected automatically by the camera, allowing the built-in flash and external
flash to function together.
The external flash is mounted on the camera by attaching it to the hot shoe on
the top of the camera. To use the external flash together with the built-in flash,
the FL-BK01 flash bracket (optional) and FL-CB02 bracket cable (optional) are
required.
This section explains how to use the FL-20 when attached to the hot shoe.
1 Slide the shoe cover off in the direction of
the arrow and attach the external flash.
• For instructions on how to attach the flash, refer
to the manual for the external flash.
• Keep the shoe cover in a safe place to prevent it
getting lost, and replace it on the camera when
you have finished using the external flash.
Mode dial
Shoe cover
Hot shoe
To Next Page
Loading...
