121
7
Playback
7 Playback
Viewing still pictures
1 Set the mode dial to q (playback mode)
and turn the camera on.
g“Turning the power on/off” (P.25)
• The last picture taken is displayed. (Single-frame
playback)
• Shooting information is displayed for about 3
seconds. You can change how much information is
displayed on the screen.
g
“INFO – Displaying shooting
information” (P.135)
• For details of the information displayed, see
“Viewfinder and monitor indications” (P.11).
2 Use the arrow pad or control dial to play back other pictures.
• Arrow pad
• Control dial
• If no operation is performed for about 3 minutes, the camera automatically
enters the sleep mode and the monitor or viewfinder turns off. Press f or
any button to turn the monitor or viewfinder on.
Mode dial
Arrow pad
Mode dial
Control dial
'04.04.17 15:30
Displays the next picture.Displays the previous picture.
Jumps to the picture 10 frames back.
Jumps to the picture 10 frames ahead.
Displays the next picture.Displays the previous picture.
Note
To Next Page
Loading...
