197
Printing pictures
11
Direct printing (PictBridge)
Trim the picture
To set trimming by MORE in PRINT or MULTI PRINT mode, follow the
procedure below.
1 Use the arrow pad and zoom lever to select
the trimming position and size.
•Press acbd to select the trimming frame, and
turn the zoom lever toward W or T to decide the
trimming size.
• Use the control dial to select the height and width
of the trimming frame.
• 3:2 trimming size can be selected when the size of
the selected picture is 3264 × 2448 or
3264 × 2176.
• If trimming has already been set, the P screen
appears. Press ac to select RESET, then
press e.
2 Press e.
3 Press ac to select OK, then press e.
OK Saves the current trimming size.
RESET Sets a new trimming size.
→ Repeat the procedure from Step 1.
CANCEL Cancels the current trimming setting.
•Press e to complete trimming setting and return
to the PRINT INFO screen.
• The size of the printed picture varies depending on the printer settings. If the
trimmed picture size is small, printing magnification increases accordingly,
resulting in a printed picture with lower resolution.
• For best results with close-up prints, you are recommended to use the TIFF,
SHQ or HQ mode.
GO
4:3
To Next Page
Loading...
