64
4
Flash
Flash intensity control
You can adjust the amount of light emitted by the flash.
In some situations, you may get better results by adjusting the light emission.
Examples include small subjects, distant backgrounds, or situations when
increased contrast is desired.
1 Adjust the brightness by turning the control
dial while holding down # and F at the
same time.
TIPS
• The flash intensity can be set in 1/3EV steps or 1/2EV steps.
g“EV STEP – Setting exposure adjustment increments” (P.153)
• The flash adjustment effect may not be sufficient if the shutter speed is
faster than 1/300.
Mode dial
Control dial
# Flash mode button
F Exposure compensation
button
Turning to the left
decreases the light
emission.
Min. setting is –2.0.
Turning to the right
increases the light
emission.
Max. setting is +2.0.
0.0
Note
To Next Page
Loading...
