147
8
Customizing the camera
REC VIEW – Checking the picture
immediately after shooting
You can display the picture you have just taken on the monitor while it is being
recorded to the card. This is useful for making a brief check of the picture you
have just taken.
OFF The picture being recorded to the card is not displayed.
This is useful when you want to prepare for your next
shot while the previous picture is being recorded.
AUTO The picture you have just taken is displayed while it is
recorded to the card.
3 SEC, 5 SEC, 10 SEC You can select the length of time the picture is
displayed. If recording is not completed in the set time,
the picture is displayed until recording is finished.
1 In the top menu, select MODE MENU E
REC VIEW OFF, AUTO, 3 SEC, 5 SEC
or 10 SEC, and press e.
Or in C mode, select E REC VIEW
OFF, AUTO, 3 SEC, 5 SEC or 10 SEC, and
press e.
g“Menu basics” (P.38)
•Press e again to exit the menu.
•In C mode, set the mode dial to a different
mode to exit the menu.
Mode dial
Arrow pad
OK button
To Next Page
Loading...
