69
External flash (optional)
4
Flash
Using the slave flash mode
This setting is for when using a commercially available slave flash that is
synchronized with the camera flash.
The amount of light emitted by the flash can be adjusted in 10 levels. The flash
can fire in sequential shooting mode, but the interval between shots will be
longer if a high emission level is set.
AUTO, ! : The setting is automatically changed to # (Fill-in flash).
HSLOW : The setting is automatically changed to # SLOW1.
1 Press e while holding down #.
2
Select
Q
FLASH
SLAVE, and press
d
.
g“Menu basics” (P.38)
3 Press ac to select an emission level from
1 to 10, then press e.
4
Press
e
repeatedly until the menu disappears.
Mode dial
Arrow pad
OK button
# Flash mode
button
SLAVE
GO
SELECt
FLASH MODE
w
FLASH
SLOW
IN+
SLAVE FLASH
5
GO
SELECt
To Next Page
Loading...
