Olympus CAMEDIA C-8080 Wide Zoom - DIAL - Changing the Function of the Control Dial

150
8
Customizing the camera
DIAL – Changing the function of the control dial
You can change the function of the control dial and arrow pad in the shooting
mode. Normally, to adjust the exposure compensation, you turn the control dial
while holding down F, but this feature lets you set the exposure compensation
using only the control dial.
In addition, it is also possible to set the functions by using both direct buttons
and the control dial with only the direct buttons.
The function of the control dial and arrow pad varies depending on the shooting
mode. You can also assign functions chosen from CUSTOM 1, CUSTOM 2 and
CUSTOM 3. For more details, see the table on the next page.
1 In the top menu, select MODE MENU  E
 DIAL  NORMAL, CUSTOM 1, CUSTOM 2
or CUSTOM 3, and press e.
Or in C mode, select E  DIAL 
NORMAL, CUSTOM 1, CUSTOM 2 or
CUSTOM 3, and press e.
g“Menu basics” (P.38)
•Press e again to exit the menu.
•In C mode, set the mode dial to a different
mode to exit the menu.
Mode dial
Arrow pad
OK button