163
8
Customizing the camera
CONTROL PANEL – Using the monitor as
a control panel
This option lets you display the each setting on the monitor in the shooting
mode. The subject is displayed on the viewfinder.
1 In the top menu, select MODE MENU E
CONTROL PANEL ON, and press e.
Or in C mode, select E CONTROL
PANEL ON, and press e.
g“Menu basics” (P.38)
•Press e again to exit the menu.
•In C mode, set the mode dial to a different
mode to exit the menu.
• The control panel is displayed on the monitor.
• Even when the control panel is displayed on the
monitor, you can display the subject by pressing
f.
• Pressing the direct button displays the setting in
green on the control panel. Each setting can be
made on the control panel by turning the control
dial.
• For more details g“Control panel
screen” (P.164)
• The subject is displayed on the monitor when using functions that use the
monitor, such as guideline shooting or panorama mode.
Mode dial
Arrow pad
OK button
f
3264*2448
P-A F
F5.6F5.6
1/200
Note
To Next Page
Loading...
