18
1
Getting started
Loading the battery
This camera uses one BLM-1 lithium ion battery.
1 Make sure the camera is turned off.
• The monitor is off.
• The viewfinder is off.
• The lens is retracted.
2 Slide the battery compartment lock from
= to ) and open the battery
compartment cover.
J Inserting a battery
3 Insert the battery, making sure that it is
correctly oriented as shown in the
illustration.
• The battery lock secures the battery when
correctly loaded.
J Removing the battery
Press the battery lock in the direction of the
arrow (A).
• The battery is ejected.
• Keeping your hand over the battery to stop it falling
out, turn the camera right way up and remove the
battery.
4 Close the battery compartment cover.
5 Slide the battery compartment lock from
) to =.
Battery compartment lock
Battery compartment cover
Battery lock
A
The amount of power consumed varies considerably depending on the
operations performed on the camera. If you use an exhausted battery, the
camera may turn off without displaying the battery level warning (P.14).
Battery level warning
To Next Page
Loading...
