93
Sequential shooting
5
Advanced shooting
Auto bracketing
Under some conditions, you may obtain better results shooting with exposure
compensation than by using the exposure setting considered optimal by the
camera.
When auto bracketing is set, the exposure is changed automatically for each
frame while the shutter button is pressed. The exposure differential and number
of frames can be selected in the menus. The focus and white balance are locked
at the first frame.
Ex : When BKT is set to ±1.0 ×3
1 In the top menu, select MODE MENU
CAMERA j BKT, and press d.
g“Menu basics” (P.38)
2 Select the exposure. Press ac to select
±0.3, ±0.7 or ±1.0, then press d.
• When the exposure adjustment is set to 1/2 EV
steps, select from ±0.5, ±1.0 and ±1.5.
g“EV STEP – Setting exposure adjustment
increments” (P.153)
3 Select the number of pictures. Press ac
to select ×3 or ×5, then press e.
• In some combinations of picture size and record mode, only ×3 is available.
•Press e repeatedly until the menu disappears.
4 Take the picture.
• Press the shutter button fully and keep it pressed to shoot the preset number
of pictures. You can stop shooting at any time to stop holding down the shutter
button.
–1.0 0.0 +1.0
Mode dial
Arrow pad
OK button
BKt
GO
SEt
SELECt
To Next Page
Loading...
