207
Troubleshooting
(Connection to a PC or Printer
Possible cause Corrective action Ref. page
The camera is not recognized by the PC.
The USB driver is not
installed.
It is necessary to install the USB driver for Windows
98/98SE. For installation instructions, see
“OPERATION MANUAL” (Digital camera – PC
connection) on the CD-ROM.
—
The camera has not
been turned on.
Press the power switch to turn the camera on. P.25
The printer is selected
as the connection
destination.
Set the USB option in the SETUP tab to PC. P.175
The camera cannot be connected to the printer.
PC is selected as the
connection
destination.
Set the USB option in the SETUP tab to <.P.175
The camera or printer
has not been turned
on.
Turn the camera or printer on. P.187
The printer does not
support PictBridge.
Refer to the printer’s instruction manual or contact
the manufacturer.
—
To Next Page
Loading...
