30
Direct buttons and menus
2
Using the buttons and menus
Ex 2: To select a flash mode
TIPS
Flash intensity control can be adjusted directly by turning the control dial while
holding down w.
Using the direct button Using the menus
Press #.Press e to display the menu, then select
MODE MENU – CAMERA tab – FLASH
MODE.
• The setting screen is displayed on the
monitor.
• Turn the control dial while holding down #
to select a flash mode.
• Use the arrow pad to select flash-related
settings.
Press
e
Select FLASH MODE
Select w Select Q FLASH Select #SLOW
The same setting screen is displayed using the direct button or the MODE MENU.
Arrow pad
Control dial
OK button
# Flash mode button
FLASH MODE
AUtO
SLO W
SEt
CARD PIC
CAMERA
FLASH MODE
AUtO