Olympus DP21 - User Manual

Other manuals for Olympus DP21

Questions and Answers:

R
Renee HigginsSep 7, 2025
Why is my Olympus Microscope picture too bright?
- A
  Alexandra DanielSep 7, 2025
  If the Olympus Microscope picture is too bright, it could be due to several reasons. Check if the exposure correction is set in the + direction and adjust it to the desired value. Also, verify the metering area; if it's set to a dark area outside the region of interest, move it to the area where you want optimum exposure. Cancel AE lock if it was set when the exposure time was longer than required. Reset and readjust the input highlight level if it’s too high. Finally, reduce the microscope illumination intensity or engage an ND filter to reduce brightness.
A
alyssa36Aug 22, 2025
Why is nothing displayed on the monitor of my Olympus DP21 Digital Camera?
- J
  Jason DavisAug 22, 2025
  If nothing is displayed on the monitor of your Olympus Digital Camera, check the following: * Ensure the monitor is turned ON. * Verify that the display cable is correctly connected. * Confirm that the monitor resolution is set correctly. * Check if the system is in sleep mode and adjust the display power OFF setting if needed.
T
tarajenkinsSep 5, 2025
Why aren't functions interlocked with microscope operations working on my Olympus DP21?
- P
  pmitchellSep 5, 2025
  If functions interlocked with microscope operations do not work on your Olympus Digital Camera, check the following: * Ensure that the cables of the microscope, control box for coded units, and DP21 are correctly connected. * Verify that the control box for coded units is recognized. Set the main switches of the control box for coded units and DP21-CB to ON in the following order: 1) control box; 2) DP21-CB. * Confirm that the code revolving nosepiece is connected to the control box for coded units.
C
cbradleySep 3, 2025
Why is the played movie fast forwarded spontaneously on my Olympus Digital Camera?
- S
  sheltonandreaSep 3, 2025
  If the played movie is fast forwarded spontaneously on your Olympus Digital Camera, it is likely because the save folder is located on the network, causing a slow frame rate. To resolve this, save the movie files in the USB memory.
D
Danielle GambleSep 2, 2025
Why can't I use another 1394 device simultaneously with my Olympus DP21?
- R
  ralexanderSep 2, 2025
  If you cannot use another 1394 device simultaneously with your Olympus Digital Camera, it is because the DP21-dedicated driver is installed. When the DP21 is connected to a PC, other 1394 devices cannot be used on the same PC.
D
Daniel FarmerAug 31, 2025
Why are the colors in the image strange with my Olympus DP21 Digital Camera?
- M
  Michael SmithSep 1, 2025
  If the colors in the image appear strange on your Olympus Digital Camera, the issue might be due to: * An incorrect color temperature setting causing erroneous white balance. Set the color temperature correctly. * Incorrect screen color setup. Correct to the optimum color setup.
J
Joseph JimenezAug 30, 2025
Why is the recorded image too dark or too bright on my Olympus DP21 Digital Camera?
- B
  Brandon LopezAug 30, 2025
  If the recorded image is too dark or too bright on your Olympus Digital Camera, check the following: * Ensure that the AE LOCK, exposure adjustment, and metering area are set correctly. * Try adjusting the brightness again. * If using a fluorescent lamp, switch to a different light source.
S
Shawn PerezAug 29, 2025
What to do if the hand switch buttons on my Olympus DP21 Digital Camera do not work?
- C
  Curtis MoranAug 29, 2025
  If the hand switch buttons on your Olympus Digital Camera are not working, check these items: * Ensure the system is ON and not in standby mode by pressing the main switch of the control box to ON. * Verify that the AC adapter is correctly connected to the control box and the power cord is firmly plugged into a power outlet. * Make sure the USB cable connecting the hand switch is correctly connected.
G
gatescarolynAug 26, 2025
Why does the calendar reset every time on my Olympus DP21 Digital Camera?
- P
  pfranklinAug 27, 2025
  If the calendar resets every time on your Olympus Digital Camera, the built-in battery is exhausted. The battery can only be replaced by the manufacturer’s personnel for a fee. Please contact Olympus.
L
llynchAug 25, 2025
Why is the played image not displayed on the monitor of my Olympus DP21?
- M
  Megan WagnerAug 26, 2025
  If the played image is not displayed on the monitor of your Olympus Digital Camera, check the following: * Make sure the system is ON and not in sleep mode by pressing the main switch of the control box to ON. * Ensure the system is in PLAY mode by pressing the MODE switch on the hand switch. * Verify that the USB memory contains a recording by checking the number of remaining images.