25
EN
2
How to Use the Power/Hold Switch
How to Use the Power/Hold Switch
Turning the power on
Slide the power/hold switch in the
direction of the arrow.
•
The home screen appears.
Sleep mode
If the recorder remains stopped for 10
minutes or more (initial setting), the
display turns off and the recorder enters
the sleep (power-saving) mode (
☞
p.108).
To clear the sleep mode, slide the power/
hold switch in the direction of the arrow
to turn the power on again.
A
•
The existing data or the settings for each mode
are retained even after the power is turned off.
Turning the power off
Slide the power/hold switch in the
arrow direction and keep it for one
second or more.
To Next Page
Loading...
