Olympus LS-100 - Segment Repeat Playback

49
EN
3
Playback
Playback
Segment repeat playback
This feature allows you to play back a part of a
file in repeat.
A
•
Be sure to assign the [A-B] function to the
Fn
button in advance (
☞
P.105).
1
Select the file that has the segment
you wish to play back in repeat,
and start playback. (
☞
P.34, P.45)
2
At the position you wish to start the
segment repeat, press the preassigned
Fn
button.
•
[
w
] will flash on the display.
•
While this [
w
] is flashing, you can still
fast-forward or rewind just as in normal
playback (
☞
P.47), allowing you to
quickly locate the end position.
Releasing the segment repeat
playback
Pressing any of the following buttons will
release the segment repeat playback.
▌
a
Fn
(Cancel) button
Pressing the
Fn
(Cancel) button will
release the segment repeat playback
and set the recorder back to the normal
playback mode.
b
0
button
Pressing the
0
button will release
the segment repeat playback and the
recorder will skip to the beginning of the
current file.
c
STOP
button
Pressing the
STOP
button will release
the segment repeat playback, and
playback will stop.
d
9
button
Pressing the
9
button will release
the segment repeat playback and the
recorder will skip to the beginning of the
next file.
Note
•
Adding/erasing an index mark while a segment
is being played back in repeat will release the
segment repeat playback, and set the recorder
back to the normal playback mode.
c
d
a
b
3
At the position you wish to end the
segment repeat, press the
Fn
button again.
•
The segment will be played back in
repeat until you release the segment
repeat playback.