Olympus LS-100 - Activating the Hold Mode; Clearing the Hold Mode

26
EN
2
How to Use the Power/Hold Switch
How to Use the Power/Hold Switch
Activating the hold mode
In the hold mode, the recorder remains active
but does not accept button operations.
This allows you to safely carry the recorder
because the recorder does not operate even
if a button is accidentally pressed in your bag.
This mode also prevents the recorder from
accidentally stopping during recording.
Slide the power/hold switch to [HOLD].
•
[
HOLD] appears on the display.
Clearing the hold mode
Slide the power/hold switch to position
A
.
Note
•
If a button is pressed in the hold mode, the
PEAK display lamp (R) flashes in orange but the
recorder does not operate.
•
If the hold mode is activated during playing (or
recording), the recorder continues to play (record)
sound (The recorder stops when playback ends
or when recording ends owing to the memory
becoming full).