Olympus LS-100 - Bouncing Tracks to a Single File

63
EN
4
Creating a Multi-Track Project
5
Press the
REC button to start recording.
•
Listening to the playback, press the
REC
button. The recording will be made on the
track specified in step
1
.
6
Press the
STOP button to stop recording
and playback.
9
Repeat steps 3 to 6 to
add more sound
sources to empty
tracks.
10
Bounce the tracks
This recorder allows you to save up to 8 tracks
under 1 project. Once you run out of empty
tracks, create bounce files and assign them to
tracks.
You can bounce any of the files that are currently
assigned to tracks.
1
Press the preassigned
Fn (Bounce) button.
•
The option of bouncing files becomes
available once you set the "Track
Assignment" (
☞
P.62).
•
Be sure to assign the [
Bounce] function to
the
Fn
button in advance (
☞
P.106).
2
Press the
+
button to select [Start].
3
Press the
OK
button.
•
An animation will appear on the display, and
bouncing starts.
•
[
Bounce] appears when the bouncing is
complete. It will be saved as a new PCM
format [44.1kHz/16bit] file under the same
project.
Creating a Multi-Track Project