S
ETUP
part
2
13
INPUT CONNECTION EXAMPLES
The figure below shows the wiring hookup for any thermocouple type. For
example, for Type K hookup, connect the yellow wire to the + (+S) Terminal and
the red wire to the Ð (ÐS) Terminal. When configuring your controller, select
Thermocouple and Thermocouple type in the Input Type menu (see part 3).
2.5.1. Thermocouple
Figure 2.5.2 Thermocouple Wiring Hookup
TYPE Input Connector Jacket (external insulation)
Terminal 1 (-) Terminal 2 (+) Extension Grade
J Red White dark-Brown Black
K Red Yellow dark-Brown Yellow
T Red Blue dark-Brown Blue
E Red Purple dark-Brown Purple
N Red Brown dark-Brown Brown
R Red Black - Green
S Red Black - Green
B Red Black - Black