Omega MICROMEGA CN77000 series User Manual

part
3
O PERATION : C ONFIGURATION M ODE
40
Loop Break Alarm cont.
Display Action Response
ID CODE OPTION SUBMENU
12) Display flashes current status of ID Option, enabled or disabled.
Press MAX 13) Press MAX button to select between Enable and Disable.
Press ENTER 14) Display flashes Ò
strd
Ó and advances to ÒOutput 1.Ó
With ID Code Option disabled, the ID Number submenu is hidden. Refer to the appropriate setpoints section for setting
differences.
ID
DSBL
Note
☞

Omega MICROMEGA CN77000 series Specifications

General

Brand	Omega
Model	MICROMEGA CN77000 series
Category	Controller
Language	English