Omicron CP TD1 Reference Manual

Operation
21
2 Operation
2.1 Measurement Setup
2.1.1 Setup of Devices with Trolley
The equipment trolley holds the CPC 100, CP TD1 and all required cables. The
trolley is equipped with a grounding bar with three knurled screws to ensure a
solid connection to the grounding terminals of all devices.
2.1.2 Setup of Devices without Trolley
If the CPC 100 and CP TD1 are to be operated without trolley, place them on
their transport cases and connect them with the long type data cable
CPC 100 ⇔ CP TD1 (3m) and the long-type booster cable CPC 100 ⇔ CP TD1
(3m). Each device has to be grounded separately with a 6m grounding cable of
at least 6mm
2
.

Omicron CP TD1 Specifications

General

Brand	Omicron
Model	CP TD1
Category	Measuring Instruments
Language	English