Preface
7
Using this Manual
This User Manual provides information on how to use the CP TD1 safely,
properly and efficiently. The CP TD1 Reference Manual contains important
safety rules for working with the CP TD1 and gets you familiar with operating the
CP TD1. Following the instructions in this Reference Manual will help you to
prevent danger, repair costs and possible down time due to incorrect operation.
The CP TD1 Reference Manual always has to be available on the site where the
CP TD1 is used. It must be read and observed by all users of the CP TD1.
Reading the CP TD1 Reference Manual alone does not release you from the
duty of complying with all national and international safety regulations relevant
to working on power transformers.
Operator Qualifications and Safety Standards
Working on high-voltage assets can be extremely dangerous. Testing with the
CP TD1 must be carried out only by qualified, skilled and authorized personnel.
Before starting to work, clearly establish the responsibilities.
Personnel receiving training, instructions, directions, or education on the
CP TD1 must be under constant supervision of an experienced operator while
working with the equipment.
Testing with the CP TD1 must comply with the internal safety instructions as well
as additional relevant documents.
In addition, observe the following safety standards, if applicable:
• EN 50191 (VDE 0104) "Erection and Operation of Electrical Equipment"
• EN 50110-1 (VDE 0105 Part 100) "Operation of Electrical Installations"
• IEEE 510 "IEEE Recommended Practices for Safety in High-Voltage and
High-Power Testing"
To Next Page
Loading...
Need help?
General
