Omicron CP TD1 Reference Manual

Preface
9
Safety Rules
Before operating the CP TD1, read the following safety rules carefully. If you do
not understand some safety rules, contact OMICRON electronics before
proceeding.
Maintenance and repair of the CP TD1 is only permitted by qualified experts at
OMICRON electronics repair centers.
Operating the Measurement Setup
Only personnel qualified in electrical engineering and trained by OMICRON
electronics are authorized to operate the CP TD1. Before starting the work,
clearly establish the responsibilities.
Personnel receiving training, instructions, directions, or education on the
CP TD1 must be under constant supervision of an experienced operator while
working with the equipment.
The operator is responsible for the safety requirements during the whole test.
Warning: Do not enter the high-voltage area if the red warning light of the
CPC 100 is on since all outputs carry dangerous voltage or current!
Always obey the five safety rules and follow the detailed safety instructions in
the respective user manuals.

Omicron CP TD1 Specifications

General

Brand	Omicron
Model	CP TD1
Category	Measuring Instruments
Language	English