3 Part Names and Basic Procedures
3 - 6
Digital Temperature Controllers (Simple Type) User’s Manual (H211)
Keys
Key Name Overview Description
O
Level Key Selects the setting
level.
The next setting
level depends on
how long the key is
pressed.
• In Operation Level
• Press once for less than 1 second to go to
Adjustment Level.
• Press for at least 3 seconds to go to Initial Setting
Level.
• In Adjustment Level
• Press once for less than 1 second to go to
Operation Level.
• Press for at least 3 seconds to go to Initial Setting
Level.
• In Initial Setting Level
• Press for at least 1 second to go to Operation
Level.
• Display amov (Move to Advanced Function
Setting Level) and then enter −169 to go to
Advanced Function Setting Level.
M
Mode Key Changes the
parameter that is
displayed within a
setting level.
• Press once to go to the next parameter.
• Hold to go to the previous parameter.
D
U
Down Key and Up
Key
Set the value. • Hold the key to increment or decrement the value
quickly.
• Any changes in settings are applied at the following
times:
• After 3 seconds elapse
• When the M Key is pressed
• When the level is changed with the O Key
S
Shift Key (PF Key) Operates as a
user-defined
function key.
• Press the S to select the digit to change.
You can change the PF Setting parameter to assign
any of the following functions.
• Press the S Key for at least 1 second and then
specify one of the following functions:
RUN/STOP, auto/manual, autotuning, or canceling an
alarm latch
The PF Key operates as a Digit Shift Key by default.
Example: If you set the PF Setting parameter to STOP,
operation will stop when you press the PF Key for at
least 1 second.
To Next Page
Loading...
