Omron NX102-12 Series

Related Manuals
The followings are the manuals related to this manual. Use these manuals for reference.
Manual name Cat. No. Model number Application Description
NX-series CPU Unit
Hardware User's Manual
W535
NX701-££££
Learning the basic
specifications of the
NX701 CPU Units,
including introductory
information, design-
ing, installation, and
maintenance.
Mainly hardware in-
formation is provided.
An introduction to the entire NX701 system
is provided along with the following infor-
mation on the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NX-series
NX102 CPU Unit
Hardware
User
’s Manual
W593
NX102-££££
Learning the basic
specifications of the
NX102 CPU Units,
including introductory
information, design-
ing, installation, and
maintenance.
Mainly hardware in-
formation is provided.
An introduction to the entire NX102 system
is provided along with the following infor-
mation on the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NX-series
NX1P2 CPU Unit
Hardware
User
’s Manual
W578
NX1P2-££££
Learning the basic
specifications of the
NX1P2 CPU Units,
including introductory
information, design-
ing, installation, and
maintenance.
Mainly hardware in-
formation is provided.
An introduction to the entire NX1P2 system
is provided along with the following infor-
mation on the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NJ-series CPU Unit
Hardware User's Manual
W500
NJ501-££££
NJ301-££££
NJ101-££££
Learning the basic
specifications of the
NJ-series CPU Units,
including introductory
information, design-
ing, installation, and
maintenance.
Mainly hardware in-
formation is provided.
An introduction to the entire NJ-series sys-
tem is provided along with the following in-
formation on the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NJ/NX-series CPU Unit
Software User
’s Manual
W501
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning how to pro-
gram and set up an
NJ/NX-series CPU
Unit.
Mainly software infor-
mation is provided.
The following information is provided on a
Controller built with an NJ/NX-series CPU
Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3
language specifications
Related Manuals
27
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)