Omron NX102-12 Series User Manual


Overwriting
You can specify whether to overwrite a file of the same name as the transferred file at the file trans-
fer destination. If you specify not overwriting files and a file of the same name exists at the transfer
destination, the source file will not be transferred.
12-1-4
Other Functions
You can also use the following two functions for file transfers.
•
Retrying connection processing with the FTP server
• Using wildcards to specify the files to transfer
These functions are described in the following sections.

Retrying Connection Processing with the FTP Server
If connection processing fails to connect with the FTP server, the connection is automatically retired
up to three times. You can set the timeout time that is used to determine connection failure, the
number of retries, and the retry interval.

Using Wildcards to Specify the Files to Transfer
You can use wildcards to specify the names of files to transfer. This allows you to transfer more
than one file at one time.
12 FTP Client
12-4
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)

Omron NX102-12 Series Specifications

General

Brand	Omron
Model	NX102-12 Series
Category	Controller
Language	English