7-2-14
Saving the Network Configuration File
You can save device parameters set in the Network Configurator or device parameters uploaded from
the network in a network configuration file.
1 Select File - Save As.
The following dialog box is displayed.
Untitled.nvf is displayed as the default file name.
2 Input the file name, and then click the Save Button.
This completes the network configuration file save operation.
3 When the network configuration is changed later, you can overwrite the existing network con-
figuration file if you select File - Save, or click the Button.
4 You can select the Select target network Check Box in the Option Area to select and save
only the required network configuration files from the existing multiple files.
7 Tag Data Link Functions
7-73
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
7-2 Setting Tag Data Links
7
7-2-14 Saving the Network Configuration File
To Next Page
Loading...
