Omron NX102-12 Series User Manual

Introduction
Thank you for purchasing an NJ/NX-series CPU Unit.
This manual contains information that is necessary to use the NJ/NX-series CPU Unit. Please read
this manual and make sure you understand the functionality and performance of the NJ/NX-series
CPU Unit before you attempt to use it in a control system.
Keep this manual in a safe place where it will be available for reference during operation.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (electrical engineers or the equivalent).
• Personnel in charge of introducing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and maintaining FA systems.
• Personnel in charge of managing FA systems and facilities.
For programming, this manual is intended for personnel who understand the programming language
specifications in international standard IEC 61131-3 or Japanese standard JIS B 3503.
Applicable Products
This manual covers the following products.
• NX-series CPU Units
• NX701-17££
• NX701-16££
• NX102-12££
• NX102-1
1££
• NX102-10££
• NX102-90££
• NX1P2-11££££
• NX1P2-11££££1
• NX1P2-10££££
• NX1P2-10££££1
• NX1P2-90££££
• NX1P2-90££££1
• NX1P2-9B££££
• NX1P2-9B££££1
• NJ-series CPU Units
• NJ501-£5££
• NJ501-£4££
• NJ501-£3££
• NJ301-12££
• NJ301-1
1££
• NJ101-10££
• NJ101-90££
Part of the specifications and restrictions for the CPU Units are given in other manuals.
Refer to Relevant Manuals on page 2 and Related Manuals on page 27
.
Introduction
1
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)

Omron NX102-12 Series Specifications

General

Brand	Omron
Model	NX102-12 Series
Category	Controller
Language	English