Omron NX102-12 Series

Manual name Cat. No. Model number Application Description
NJ/NY-series
NC Integrated Controller
User
’s Manual
O030 NJ501-5300
NY532-5400
Performing numerical
control with NJ/NY-
series Controllers.
Describes the functionality to perform the
numerical control.
NJ/NY-series
G code
Instructions Reference Man-
ual
O031 NJ501-5300
NY532-5400
Learning about the
specifications of the
G code/M code in-
structions.
The G code/M code instructions are descri-
bed.
NJ/NX-series
T
roubleshooting Manual
W503
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning about the
errors that may be
detected in an
NJ/NX-series Con-
troller
.
Concepts on managing errors that may be
detected in an NJ/NX-series Controller and
information on individual errors are descri-
bed.
Sysmac Studio Version 1
Operation Manual
W504 SYSMAC
-SE2£££
Learning about the
operating procedures
and functions of the
Sysmac Studio.
Describes the operating procedures of the
Sysmac Studio.
CNC Operator
Operation Manual
O032 SYSMAC
-R
TNC0£££D
Learning an introduc-
tion of the CNC Op-
erator and how to
use it.
An introduction of the CNC Operator, in-
stallation procedures, basic operations,
connection operations, and operating pro-
cedures for main functions are described.
NX-series
Safety Control Unit
User's Manual
Z930
NX-SL££££
NX-SI££££
NX-SO££££
Learning how to use
NX-series Safety
Control Units.
Describes the hardware, setup methods,
and functions of the NX-series Safety Con-
trol Units.
Related Manuals
29
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)