For details on the Network Configurator, refer to S
ection 7 Tag Data Link Functions on page
7-1.
Additional Information
You can also use the Sysmac Studio to set the tag data links.
Refer to A-2 Use the Sysmac Studio to Set the T
ag Data Links (EtherNet/IP Connections) on
page A-3 for details on setting the tag data links on the Sysmac Studio.
1 Introduction
1-7
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
1-2 System Configuration and
Configuration Devices
1
1-2-2 Support Software Required to Construct a Network
To Next Page
Loading...
