Omron NX102-12 Series User Manual

ftp> type binary
200 Type set
to I.
ftp>
Set binary data type.
6. Read the file RESULT.BIN and transfer it to the workstation.
Read file.
ftp> get RESULT
.BIN
200 PORT command successful.
150 opening data connection for result.bin (**IPaddress**port#**) (**bytes).
226 Transfer complete.
** bytes received in *.*** seconds (**bytes/s)
ftp>
7. Write the file PLAN.BIN to the Memory Card.
Write file.
ftp> put PLAN.BIN
200 PORT co
mmand successful.
150 opening data connection for plan.bin (**IPaddress**port#**) .
226 Transfer complete.
** bytes received in *.** seconds (**bytes/s)
ftp>
8. End the FTP session.
FTP ended.
ftp> bye
22
1 Goodbye.
$
11 FTP Server
11-22
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)

Omron NX102-12 Series Specifications

General

Brand	Omron
Model	NX102-12 Series
Category	Controller
Language	English