Omron NX102-12 Series User Manual

Additional Information
The updated dates of files at 12 am and 12 pm are improved in the CPU Unit with unit version
1.14 or later
.
FTPGetFile Instruction
The FTPGetFile instruction downloads the specified file from the specified directory on the FTP server
to the specified directory in the SD Memory Card.
Y
ou can use wildcards to specify the file name to allow you to download more than one file at the
same time.
If the directory specified for the download does not exist in the SD Memory Card, the directory is creat-
ed and the data is downloaded to it.
You can specify the following options.
• Transfer mode
• Open Mode for data connection
• Deleting files after transfer
• Overwriting
FTP server
Downloading
One or more files
Ethernet
F
TP client
FTPPutFile Instruction
The FTPPutFile instruction uploads the specified file from the specified directory in the SD Memory
Card to the specified directory on the FTP server
.
You can use wildcards to specify the file name to allow you to upload more than one file at the same
time.
If the directory specified for the upload does not exist on the FTP server, the directory is created and
the data is uploaded to it.
You can specify the following options.
• Transfer mode
• Open Mode for data connection
• Deleting files after transfer
• Overwriting
12 FTP Client
12-6
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)

Omron NX102-12 Series Specifications

General

Brand	Omron
Model	NX102-12 Series
Category	Controller
Language	English