Omron NX102-12 Series

Subtree name Standard [(identifier) attribute] Support
Implementation spec-
ifications
sysServices [(7) RO]
The value of the provided service.
Support-
ed
64

Interfaces Group
Subtree name Standard [(identifier) attribute] Support
Implementation spec-
ifications
ifNumber [(1) RO]
The number of network interfaces.
Support-
ed
• NX701 CPU Unit: 3
• NX102 CPU Unit: 3
• NX1P2 CPU Unit: 2
• NJ-series CPU Unit:
2
ifTable [(2) NA]
Interface entity table
--- ---
ifEntry [(1) NA]
Row data for interface information
The index is ifIndex.
--- ---
ifIndex [(1) RO]
A number used to identify the interface.
Support-
ed
• NX701 CPU Unit: 1
to 3
• NX102 CPU Unit: 1
to 3
• NX1P2 CPU Unit: 1
to 2
• NJ-series CPU Unit:
1 to 2
ifDescr [(2) RO]
Information related to the interface (includes
manufacturer name, product name, and hard-
ware interface version).
Support-
ed
• NX701 CPU Unit:
10/100/1000M Giga-
bit Ethernet Port
• NX102 CPU Unit:
10/100M Fast Ether-
net Port
• NX1P2 CPU Unit:
10/100M Fast Ether-
net Port
• NJ-series CPU Unit:
10/100M Fast Ether-
net Port
ifType [(3) RO]
The type of interface classified according to
the physical/link layer protocol directly under
the network layer of the protocol stack.
Support-
ed
ethernet-csmacd (6)
ifMtu [(4) RO]
MTU value
The maximum size (in octets) of datagrams
that can be sent and received through this in-
terface.
Support-
ed
1500
14 SNMP Agent
14-6
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)