EasyManua.ls Logo

Omron NX102-12 Series

Omron NX102-12 Series
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Subtree name Standard [(identifier) attribute] Support
Implementation spec-
ifications
ifInUnknown-
Protos
[(15) RO]
The number of packets received, but discard-
ed because they were of an illegal or unsup-
ported protocol.
For example, Ethernet packets did not have
IP set for the field that identifies their higher
level protocol.
Support-
ed
According to the stand-
ard.
ifOutOctets [(16) RO]
The number of octets of packets sent through
this interface.
This includes framing characters.
Support-
ed
According to the stand-
ard.
ifOutUcastPkts [(17) RO]
The number of unicast packets sent by high-
er level protocols.
This includes discarded packets and unsent
packets.
Support-
ed
According to the stand-
ard.
ifOutNU-
castPkts
[(18) RO]
The number of non-unicast packets sent by
higher level protocols.
This includes discarded packets and unsent
packets.
Support-
ed
According to the stand-
ard.
ifOutDiscards [(19) RO]
The number of packets that had no errors but
were discarded in the sending process (due
to a send buf
fer overflow, etc.).
Support-
ed
According to the stand-
ard.
ifOutErrors [(20) RO]
The number of packets that could not be sent
because of an error
.
Support-
ed
According to the stand-
ard.
ifOutQLen [(21) RO]
The size of the send packet queue (i.e., the
number of packets).
Support-
ed
Always 0.
ifSpecific [(22) RO]
The object ID that represents a reference to
the media-specific MIB for the interface.
For example, for Ethernet, set the object ID
of the MIB that defines Ethernet. If there is no
information, set { 0.0 }.
Support-
ed
0.0
Ip Group: Ip
Subtree name Standard [(identifier) attribute] Support
Implementation spec-
ifications
ipForwarding [(1) RW]
Indicates if the device operates as a gateway
.
IP gateways can transfer datagrams, but IP
hosts can perform only source routing. Some
nodes take only one of these values. There-
fore, if you attempt to change this object from
the SNMP Manager, a badValue error is re-
turned.
forwarding (1)
not-forwarding (2)
Support-
ed
NX701 CPU Unit:
forwarding (1)
NX102 CPU Unit:
forwarding (1), not-
forwarding (2)
NX1P2 CPU Unit:
not-forwarding (2)
NJ-series CPU Unit:
not-forwarding (2)
14 SNMP Agent
14-8
NJ/NX-series CPU Unit Built-in EtherNet/IP Port Users Manual (W506)

Table of Contents

Related product manuals