Input 10 ms as the new RPI value in the Edit Connection Dialog Box, and click the OK
Button. The
usage rate of allowable tag data link bandwidth for the device 192.168.250.1 increases to 50.17% as
shown in the Usage of Capacity column, and this indicates that the RPI for the specific connection is
set shorter.
Note that the usage rate of allowable tag data link bandwidth for the device, 192.168.250.10, is also
increased from 40.83% to 51.00%.
15 Communications Performance and Communications Load
15-21
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
15-2 Adjusting the Communications Load
15
15-2-5 RPI Setting Examples
To Next Page
Loading...
