Additional Information
If the Unit has connections with multiple nodes, the total amount of data to be exchanged will
increase, and the Unit may send or receive data larger than the data size allowed per transfer
.
In this case, the number of data transfers increases.
6.
Output ON Response Time
This is the delay time from when an output command is issued by the Controller until the output is
executed on the external output device.
Output ON response time = Output device delay time + CPU task period
Additional Information
The I/O response time may be longer due to noise, or other causes.
15 Communications Performance and Communications Load
15-28
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
To Next Page
Loading...
