EasyManua.ls Logo

Omron NX102-12 Series

Omron NX102-12 Series
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Variable name Meaning Function Data type
Range of
values
Reference
_EIP1_IPAdrDupErr Port1 IP Address Du-
plication Error
Indicates that the same IP address is as-
signed to more than one node for the
communications port 1.
TRUE: Duplication occurred.
F
ALSE: Other than the above.
Note You can use this system-de-
fined variable only for NX-ser-
ies CPU Units.
BOOL TRUE or
FALSE
page 3-43
_EIP2_IPAdrDupErr Port2 IP Address Du-
plication Error
Indicates that the same IP address is as-
signed to more than one node for the
communications port 2.
TRUE: Duplication occurred.
F
ALSE: Other than the above.
Note You can use this system-de-
fined variable only for the
NX701 CPU Units and NX102
CPU Units.
BOOL TRUE or
FALSE
page 3-43
_EIP_DNSCfgErr
*1
DNS Setting Error Indicates that the DNS or hosts settings
are incorrect. Or
, a read operation failed.
TRUE: Setting incorrect or read failed.
FALSE: Normal
BOOL TRUE or
FALSE
page 3-44
_EIP_BootpErr BOOTP Server Error NX-series CPU Units: Indicates that a
BOOTP server connection failure occur-
red on the communications port 1.
TRUE: There was a failure to connect to
the BOOTP server (timeout).
F
ALSE: The BOOTP is not enabled, or
BOOTP is enabled and an IP address
was normally obtained from the BOOTP
server.
NJ-series CPU Units: Indicates that a
BOOTP server connection failure occur-
red.
TRUE: There was a failure to connect to
the BOOTP server (timeout).
FALSE: The BOOTP is not enabled, or
BOOTP is enabled and an IP address
was normally obtained from the BOOTP
server.
BOOL TRUE or
FALSE
page 3-44
_EIP1_BootpErr Port1 BOOTP Server
Error
Indicates that a BOOTP server connec-
tion failure occurred on the communica-
tions port 1.
TRUE: There was a failure to connect to
the BOOTP server (timeout).
F
ALSE: The BOOTP is not enabled, or
BOOTP is enabled and an IP address
was normally obtained from the BOOTP
server.
Note You can use this system-de-
fined variable only for NX-ser-
ies CPU Units.
BOOL TRUE or
FALSE
page 3-44
3 System-defined Variables Related to the Built-in EtherNet/IP Port
3-12
NJ/NX-series CPU Unit Built-in EtherNet/IP Port Users Manual (W506)

Table of Contents

Related product manuals