Omron S8AS User Manual

122
List of Operations Appendix B
Setting Mode
1. The "TST" display does not appear in protection level 2.
2. The "INI" display does not appear in protection level 1 or 2.
3.
Not displayed for the S8AS-24006N/48008N.
ups
dws
trg
un o
bp s
le n
bi t
pt y
sw t
c - V
c - t
V - u
l f e
t m p
r u n
s e t
t s t
p r t
i n i
+
rs t
tgs
4.
Setting Mode
Current tripping threshold
(See note 4.)
Current tripping type (See note 4.)
Settings are made for
each branch output.
Settings are made for
each branch output.
Mode Selection Menu
Select Run Mode
Over-temperature
output
threshold
Unit number
Undervoltage alarm
threshold
Maintenance forecast
monitor output threshold
Startup sequence (See note 4.)
Baud rate
Data length
Stop bits
Parity
Shutdown sequence (See note 4.)
Tripping input setting (See note 4.)
Tripping input type setting
Send wait time
Select reset method
Communications setting
When the S8AS is in protection level 0, all of the settable items will be displayed in Setting Mode.
When the S8AS is in protection level 1 or 2, only the items in the will be displayed.
Key
Key (Transition when S8AS is in protection level 0)
/ Key (Press for 3 s.)
Key
No keys pressed for 3 s.
Power ON
Run Mode
Restart after Power
OFF in Test Mode
Select Setting Mode
Test Mode
Set
protection
level.
Initialize
parameters
(See note 2.)
Select Test Mode
(See note 1.)
(Press for 3 s.)
Protection level
(See
note 3.)
Initialize parameters.
(See note 2.)
(See
note 3.)
Setting the Parameters
The desired branch output number can be selected using the Key.
Display set value.
Change set value.
Save set value.
The display flashes, the setting is saved, and
the original display returns.
Note

Omron S8AS Specifications

General

Brand	Omron
Model	S8AS
Category	Power Supply
Language	English