Omron S8AS - Page 90

72
Special Settings and Communications Settings Section 4-7
Data Length: LEN (Bit Length)
The Data Length Setting (LEN) will be displayed if the Up (SEL) Key ( ) is
pressed from the Baud Rate Setting Display (BPS).
(Returns to LEN display.)
l e n
7
8
1
2
3
4
5
6
V
A
Yrs
s
°C
1
2
3
4
5
6
V
A
Yrs
s
°C
1
2
3
4
5
6
V
A
Yrs
s
°C
This parameter sets the data length to 7 or 8 bits.
Press the Key to display the data length setting.
The setting can be changed by pressing the or Key.
7: 7 bits
8: 8 bits
Change the setting with the or Key.
• The S8AS will automatically return to the LEN display if
no key is pressed within 3 s.
When the Key is pressed, the setting will flash. When
the flashing stops, the new setting will be saved and the
S8AS will return to the LEN display.
• If you want to confirm the new setting, press the Key
again from the LEN display.
Switch to the
Stop Bits Set-
ting (BIT).