Omron S8AS

76
Special Settings and Communications Settings Section 4-7
Reset Method Setting: RST (Reset)
The error resetting method can be set. This method will be used to reset
errors after eliminating the cause of the error.
(Returns to RST display.)
r s t
k e y
a l l
1
2
3
4
5
6
V
A
Yrs
s
°C
1
2
3
4
5
6
V
A
Yrs
s
°C
1
2
3
4
5
6
V
A
Yrs
s
°C
Press the Key to display the send wait time setting.
The setting can be changed by pressing the or
Key.
KEY: Errors can be reset using the S8AS Reset Key only.
ALL: Errors can be reset using the S8AS Reset Key or by
turning the power supply OFF.
Change the setting with the or Key.
• The S8AS will automatically return to the RST display if
no key is pressed within 3 s.
When the Key is pressed, the setting will flash.
When the flashing stops, the new setting will be saved and
the S8AS will return to the RST display.
Switch to the
Abnormal Cur-
rent Tripping
Threshold Set-
ting (C-V).
This parameter sets the error reset method.