Omtech PRO 2440 - Setting the Screen Orientation; Language Settings

55
5.9.5 Setting the Screen Orientation
1. Tap “Display”, and the menu as shown shows up.
2. To set a dierent screen orientation, tap one of the four options that you desire.
Note that your screen shows your engraving design the way you set your screen. For instance, if the screen
origin is set at the Up- left, then a design will be shown in its original orientation. If you change the screen
origin to Low-left, then the design will be shown ipped down along the X axis. If you change the screen
origin to the Up-right, then the design will be shown ipped right along the Y axis.
5.9.6 Language Settings
1. Tap Menu>Lang, and the menu as shown shows up.
2. Tap to select a language that you desire to use. The change will take eect immediately after a language is
selected, and the system returns to the main menu automatically.