Omtech PRO 2440 - Technical Specifications

3
1.4 Technical Specications
Model PRO 2440
Laser Tube
Diameter 3.15 in. 80 mm
Length 49.2 in. 1250 mm
Max. Input Power
(Laser and Motors)
1200 W
Rated Power 80 W
Wavelength 10640 nm
Focus Lens
Diameter 0.79 in. 20 mm
Thickness 0.08 in. 2 mm
Focal Length 2.5 in. 63.5 mm
Mirror
Diameter 0.98 in. 25.4 mm
Thickness 0.12 in. 3 mm
Rated Voltage/Frequency 110–120 V~ 60 Hz
Expected Service Life
at <40% / 40–70% / >70% Power
11000 / 9000 / 7000 hr.
Processing Area 39.3×23.6 in. 1000×600 mm
Front/Back Pass-Through Size 40.5×1.5 in. 1030×40 mm
Left/Right Side Pass-Through Size 25.5×1.5 in. 650×40 mm
Max. Height Adjustment 6.30 in. 160 mm
Max. Material Height 5.91 in. 150 mm
Max. Engraving Depth 0.08 in. 2 mm
Min. Engraving Depth 0.0004 in. 0.01 mm
Min. Letter Size 0.04×0.04 in. 1×1 mm
Positioning Accuracy ±0.0008 in. ±0.02 mm
Aluminum Bed Blades
Number 33
Load Capacity
(ea.)
8.5 oz. 240 g
Honeycomb Bed Dimensions 41.3×25.5 in. 1050×650 mm
Steel Bed Blades
Number 32
Load Capacity
(ea.)
0.97 440
Max. Processing Speed 39.3 ips 1000 mm/s
Max. Acceleration
X-Axis 394 ips² 8000 mm/s²
Y-Axis 315 ips² 5000 mm/s²
Provided Operating Software RDWorkds V8, Lightburn
Supported Image Formats .ai, .bmp, .dxf, .gif, .hpgl, .jpeg, .pdf, .plt, .png, .rd, .svg, .ti, .tga
Internal Air Assist
Max. Airow
(±10%)
3.2 cfm 5.4 m³/h
Port Diameter 0.3 in. 8 mm
Max. Input Power 120 W
External Fan
Max. Input Power 550 W
Max. Airow
(±10%)
306 cfm 520 m³/h
Port Diameter 5.9 in. 150 mm
Integrated Chiller
Max. Input Power 770 W
Tank Capacity 1.6 gal. 6 L
Max. Flow Rate 3.4 gpm 13 L/min.
R-410A Charge 7.1 oz. 200 g
Required Operating
Environment
Max. Humidity 5–90%
Temp. Range 40–95°F 5–35°C
Certication CE, FDA
Dimensions 61.7×54.4×41 in. 156.5×138×104 cm
Net Weight 970 lb. 440 kg