Opticum HD X403P - Preferences Menu: Timers and AV Control; Timer Functions and A;V Control

U
U
s
s
e
e
r
r
m
m
a
a
n
n
u
u
a
a
l
l
22
1.Current time information will display on the first
column; if the current time is incorrect, please
modify the time information in “Time” item.
2.Timer Number: You can press [←/→] keys to set
Timer number, and there are 8 timers in total.
3.Timer Mode: There are several modes for Timer
to setting, include Off, Once, Daily, Weekly,
Monthly and Yearly.
4.Timer Service: There are five options for “Timer
Service”, include “TV Channel” and “Radio
Channel” (timer setting for channel change and
Wakeup/Sleep) and "Record Radio" and "Record
TV" (Timer setting for Record the TV or Radio
program to USB Hard Disk) and Message
(reminding message).
5.When you select “Channel” (timer setting for
channel change and wakeup) option in “Timer
Service”, the screen will display like below:
Channel: Press [OK] key to enter channel list and
select channel that you want to setting.
Date: Use number keys to input your wakeup date.
On Time: Use number keys to input your wakeup
time. Once the time’s up, no matter what the
system is in standby mode or in playing mode, the
system will automatically switch to the channel
you want and start to play.
6.When you select “Record” option in “Timer
Service”, “On Time” function enables to set time
of begin event planned to record. Also additional
functions become active:
Duration: Enables to set time of duration of event
planned to record.
Standby After Finish: Enables to set state of
receiver after recording event.
7.When you select “Message” (reminding
message) option in “Timer Service”, the screen
will display like below:
Wakeup Message: Press [←/→] key to select
reminding message as Birthday, Anniversary and
General.
Date: You can use number key to input your
wakeup date.
On Time: Use number keys to input your wakeup
time. Once the time’s up, no matter what the
system is in standby mode or in playing mode, the
system will automatically pop a reminding
message.
The message will always display on the screen,
you can press [EXIT] key to close it.
Press [EXIT]key to exit the current menu.